Quick Tips to Finding Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. A second valve is usually located further down the line or where the gas pipe first enters.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. The shutoff valves of such systems are usually located near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.
Automatic valves for your sprinkler system may in most cases be located underground and are usually harder to find as you read more from this website. Since such valves usually have metals then you can easily find them by using a metal detector. If you use a plan to find the valves then you are sure that you are able to easily know where to start.